High Pressure Hydraulic Plunger Metering pump

Technical Data:

Flow rate: 5000L/H

Max discharge pressure: 41MPa

Regulating ratio: 10:1, Steady precision: ±1%

Suction lift: 1.5m

Medium temperature: -10℃-100℃

Max temperature: 40℃

Highest elevation: 1000m

Main feature:

a. Strong and compact design, no action seal, better sealing performance than piston pump

b. The adjustable eccentric mechanism can ensure the fluctuation of the flow rate to change gently, and the new regulating mechanism can make the adjustment more accurate and reasonable

c. Built in oil supply valve to ensure the amount of hydraulic oil, built-in safety valve, fully protect the diaphragm, to avoid the pressure of the hydraulic chamber caused by excessive rupture of the diaphragm

d. In the transmission of corrosive slurry and flammable and explosive and other dangerous chemicals, you can use double diaphragm with diaphragm rupture alarm device

Control mode

a. Power supply: 380V/220V-50Hz/60Hz/three phase/single phase

b. The frequency conversion controller accepts the external control signal, regulates the stroke speed, and the input signal is 4-20 mA analog signals

c. The motor controller controls the three-phase motor in an open / stop mode to adjust the output flow

Main application

Environmental protection, petrochemical industry, chemical, power, metallurgy, medicine, food and other fields, especially in the field of high precision, high pressure, high temperature outstanding performance.

Main components material of hydraulic end

JMD series hydraulic diaphragm metering pump model definition

Series

Flow rate/Pressure

Hydraulic end

Port